Reflow Oven Controller Motherboard for Arduino Pro Micro from 0xPIT on


Arduino Reflow Oven Controller 02 YouTube

This is a video showing the general operation of Reflowduino, a fully open-source, Arduino-compatible reflow oven controller.Full documentation, Arduino IDE.


Reflow Oven Controller Board rev 1.1 giacu92

Using a thermocouple to know the temperature inside the oven, this device controls a regular food oven using a SSR (Solid State Relay) for turning the power ON and OFF in order to get the desired temperature on each time to adjust it to the reflow profile. Is possible to choose between leaded and lead-free reflow profiles.


DIY Reflow Oven thinkering

32 Comments by: Nick Conn June 16, 2014 A reflow oven is one of the most useful tools you will ever have, and if you haven't built one yet, now is as good a time as any. [0xPIT's] Arduino.


15 ArduinoBased Reflow Oven Controller ElectronicsLab

The Arduino-based reflow oven controller comes with: PID loop control Wave Packet and Phase Fired control for AC outputs graphic TFT LC-Display, drawing the temperature curves using an Adafruit 1.8″ TFT or derivate display solely controlled using a cheap rotary encoder and its single button stores up to 30 temperature profiles in EEPROM


Reflow Oven Controller Abusing Technology

c-plus-plus arduino electronics arduino-ide pcb diy arduino-platform atmega32u4 reflow-oven-controller Updated on Jul 23, 2019 C++ dukeduck1984 / uReflowOven-Esp32-Micropython Star 102 Code Issues Pull requests μReflow Oven controller based on ESP32 with MicroPython & LVGL


Arduino Reflow Oven Controller

Three‐dimensional thermal investigations at board level in a reflow oven using thermal‐coupling method Soldering & Surface Mount Technology, Vol. 24, No. 3 Optimization modeling of the cooling stage of reflow soldering process for ball grid array package using the gray-based Taguchi method


Tindie Blog XToaster Solder Reflow Controller

The Reflowduino project is an entire do-it-yourself (DIY) reflow ecosystem consisting of open-source hardware specifically built to make it easy to control reflow appliances and apply PID temperature control while maintaining full flexibility in programming and usage while offering a bunch of features.


A Touchscreen Reflow Oven Controller Using an Arduino Pro Mini

This is an easy DIY Reflow Oven build, including an Arduino Nano. The firmware for the Arduino you can find here:http://www.mediafire.com/file/3fipu5hi4zrxie.


How to Program the Tiny Reflow Controller V2

Arduino controlled reflow oven Using Arduino Project Guidance leo6002 June 29, 2022, 9:59pm 1 As the title says, I'm planning to make an Arduino controlled hot plate for reflowing and soldering SMD components and I'm planning to implement PID control.


giacu92/ArduinoReflowOvenController repository Issues Antenna

The Reflowduino is a completely open-source, all-in-one Arduino-compatible reflow controller board that can easily transform a toaster oven into a PCB reflow oven!


Arduino Based Reflow Oven Controller Introduction Rocket Scream

Arduino Nano controls the elements of a Toaster Oven based on temperature readings to reflow tin-lead solder paste on a SMD PCB. Jan 2, 2022 • 9711 views • 3 respects reflow oven toaster oven smd Components and supplies 1 K-Type Thermocouple Probe Temperature Wire Sensor TC-1 2 Fotek SSR-25 DA Solid State Relay 1 Resistor 1k ohm 1


Reflow Oven Controller Motherboard for Arduino Pro Micro from 0xPIT on

Arduino-based reflow oven controller with: PID loop control Wave Packet and Phase Fired control for AC outputs graphic TFT LC-Display, drawing the temperature curves using an Adafruit 1.8″ TFT or derivate display solely controlled using a cheap rotary encoder and it's single button stores up to 30 temperature profiles in EEPROM


Reflow Oven Controller Motherboard for Arduino Pro Micro from 0xPIT on

The MCH he chose was rated for 20 VDC at 50 watts — perfect for powering with USB-PD. The heater sits above the main PCB on a Kapton-wrapped MDF frame with a thermistor to close the loop. While.


Arduino Based Reflow Oven Controller Introduction Rocket Scream

Arduino-based reflow oven controller with: PID loop control Wave Packet and Phase Fired control for AC outputs graphic TFT LC-Display, drawing the temperature curves using an Adafruit 1.8" TFT or derivate display solely controlled using a cheap rotary encoder and its single button stores up to 30 temperature profiles in EEPROM


Arduino Reflow Oven Controller

The Reflowduino is an all-in-one Arduino-compatible controller board that I personally designed and built, and it can easily transform a toaster oven into a PCB reflow oven!


Confused Life Reloaded Reflow oven controller with Multimeter and

A Touchscreen Reflow Oven Controller Using an Arduino Pro Mini 28 July, 2020 5.824 Views 0 Comments We have seen people make many simple reflow ovens, comprising of an old toaster oven, a Solid State Relay (SSR), a thermocouple, and a microcontroller to get it functioning.

Scroll to Top